Tmteck Roller Scanner TR1/ Wheel Scanner Carbon Fiber Composite detection
The TR1 Scanners are designed to detect composite and other smooth surface
materials, Such as carbon fiber and other composite materials commonly used in
aerospace industry. The wheel scanner also provides a feasible alternative liquid
immersion detection technology.
Unique tire materials to ensure high quality and immersion ultrasonic testing. For
wheel scanners, even in difficult scanning positions, minimum coupling and pressure
are needed to provide good coupling and strong signal.
Roller scanner TR1, its ergonomic design makes it the perfect tool for manual scanning.
TMTeck Encoder with various connector is available on request, support Olympus,
GE, ZETEC, etc.
TR1 roller scanner adopts the standard modular design, which can be used to
replace different frequency probes according to the detection requirements. Its basic
modules: array probe, probe wheel module, main support frame module, laser button
module, grip module, encoder module.
| Model | Features and Applications |
| TR1 Roller Scanner | 1. High coupling effect with minimal couplant2. Easy setup and have efficient C-scan3. 25mm(0.98 in) water delay block for 50 mm (1.97in) compositesinspection.
4. Up to 51.2 mm wide beam coverage 5. Low transparent wheel material 6. Zero-degree detection of composite materials and other materials with smooth surface. 7. Plates corrosion detection, axial corrosion detection in large-diameter pipes |
Encoder installation instruction
Specifications of wheel scanner
| describe | value |
| Typical near surface resolution(reflector with a flat diameter of 3 mm) | mm, 5 MHz (composite); 1.5mm, 3.5MHz(composite); 3mm 5MHz (steel / aluminum) |
| Minimum surface curvature (convex radius) | 50mm |
| Location of secondary interface echo (in composites) | 50 mm |
| Encoder voltage | 5 V |
| Weight (w/o liquid) | 1.7KG |
Ordering information
| Part number | Frequency(MHz) | DelayLine(mm) | Num. ofElements | Pitch(mm) | Aperture(mm) | Elevation(mm) |
| ROLLER-TR1-1L64 | 1 | 25 | 64 | 0.8 | 51.2 | 8.0 |
| ROLLER-TR1-3.5L64 | 3.5 | 25 | 64 | 0.8 | 51.2 | 6.4 |
| ROLLER-TR1-5L64 | 5 | 25 | 64 | 0.8 | 51.2 | 6.4 |
| ROLLER-TR1-10L64 | 10 | 25 | 64 | 0.8 | 51.2 | 6.4 |
