Wholesale Metallographic Specimen Cutting Machine - Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100 – TMTeck

Short Description:

Product Detail

Product Tags

Feedback (2)

Our well-equipped facilities and great excellent command throughout all stages of generation enables us to guarantee total customer fulfillment for Phased Array Flaw Detector, Ultraviolet Lights, Ultrasound Scanning Cable, First company, we understand each other. Further more company, the trust is getting there. Our enterprise normally at your provider anytime.

Wholesale Metallographic Specimen Cutting Machine - Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100 – TMTeck Detail:

Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100
mac (1)
Model TMSQ-60 Metallographic Specimen Cutting Machine can be used to cut the general metallographic or petrographic specimen materials. To enable the machine to cut the best specimen in a safe state, this kind of machine is equipped with fully enclosed structure and fast clamping mechanism, and there is also a cooling tank for coolant recycling, in order to clear up the heat produced during cutting and avoid the metallographic or petrographic structure deforming of specimen because of heating influence. This machine features easy operation and reliable safety. It is the best instrument for specimen preparing and cutting.
Technical specifications:
1. Max. cutting section: Φ60mm
2. Rotate Speed: 2800rpm
3. Abrasive wheel: 250×2×32mm
4. Electric motor: 2.2KW 380V, 50Hz
5. Dimensions : 730×700×540mm
mac (2)
Model SQ-80 Metallographic Specimen Cutting Machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or petrographic structure. The equipped cooling system can clear up the heat produced during cutting so that it will avoid the metallographic or petrographic structure deforming of specimen because of heating influence. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
mac (3)
Technical specifications:
1. Power: Three-phase four-wire (380V 50Hz)
2. Rotate Speed: 2800rpm
3. Abrasive wheel: 250×1.2×32mm
4. Max. cutting diameter: 80mm
5. Electric motor: Y2-100l-2 3.0KW

Model SQ-100 Metallographic Specimen Cutting Machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or petrographic structure. The equipped cooling system can clear up the heat produced during cutting so that it will avoid the metallographic or petrographic structure deforming of specimen because of heating influence. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.

Technical specifications:
1. Power: Three-phase four-wire (380V 50Hz)
2. Rotate Speed: 2800rpm
3. Abrasive wheel: 250×1.2×32mm
4. Max. cutting diameter: 100mm
5. Electric motor: Y2-100l-2 3.0KW

Product detail pictures:

Related Product Guide:

We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for Wholesale Metallographic Specimen Cutting Machine - Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100 – TMTeck , The product will supply to all over the world, such as: Belgium, Netherlands, Iran, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.

This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!