Online Exporter Micro Vickers Hardness Tester Price - LX-A C D F Rubber hardness tester Shore Durometer shore hardness tester – TMTeck

Shore Hardness Tester LX-A

Function
LX-A hardness tester is widely applied in the low and medium hardness plastic, all kinds of rubber,
multi-dimensional fat, leather, wax hardness test etc. The product refers to ISO868 and the ISO7619 international
standard production, conforms to GB/T531, JB6148 and the JJG304 standard.
Character
Needle indicates, easy to read, high accuracy.
Dual needle, after test the top value, the driven needle will stop move, convenience the user to read.
Handhold design, carry conveniently, handhold measure, also can be installed with match test stand.
Specification
Dial value: 0 ～ 100HA
Needle stroke: 2.5 mm
Measure range: 10 ～ 90HA
Needlepoint size: Ф 0.79 mm
Weight: ～ 0.5 kg

Shore Hardness Tester LX-C

Function
LX-C hardness tester is used in measuring the hardness of oak model micro porous material which includes vesicant
when the compression ratio is 50%, the stress above 0.5kg/cm2. It also can be used in other similar hardness materials.
Character
Needle indicates, easy to read, high accuracy.
Dual needle, after test the top value, the driven needle will stop move, convenience the user to read.
Handhold design, carry conveniently, handhold measure, also can be installed with match test stand.
Specification
Dial value: 0 ～ 100HA
Needle stroke: 2.5 mm
Measure range: 10 ～ 90HC
Needlepoint size: SR 2.5 mm
Weight: ～ 0.5 kg

Shore Hardness Tester LX-D

Function
LX-D hardness tester is suitable for hardness test of high degree of hardness material, such as
common hard rubber, hardened resin, acryl, Plexiglas, thermos plastic rubber, printing plate, fibred.
The product conforms to HG/T2489 and other related standard request.
Character
Needle indicates, easy to read, high accuracy.
Dual needle, after test the top value, the driven needle will stop move, convenience the user to read.
Handhold design, carry conveniently, handhold measure, also can be installed with match test stand.
Specification
Dial value: 0 ～ 100HD
Needle stroke: 2.5 mm
Measure range: 10 ～ 90HD
Needlepoint size: SR 0.1 mm
Weight: ～ 0.5 kg

Sponge Durometer LX-F

Function
LX-F type sponge durometer is suitable for the determination of soft foam, polyurethane foam rubber products’ hardness.
And it will be different with the other hardness tester In the aspects of using. When using, the presser foot directly
contact to the sample, and see its own weight as force measurement load.
Character
1:Scope of pressure needle route: 0 ~ 2.5millimeters.
2:The scale value: 0-100 degrees.
3:The force of pressure needle end: 550mN~4300mN（56~438.5g).
Method of using
Handheld the middle of the instrument, located the hardness tester gently on the plane specimens which is bigger than presser foot (or specimen). Reading out the value in1 seconds when durometers’ presser foot contact with the sample smoothly. And the tick of pointers is the hardness value of sample (specimen). In order to improving the
accuracy of measurement, you should put the sample on a flat plate glass or plate. Each measuring point should be measured only one time, the measuring point at a distance of more than 25mm of different parts from the same sample should be more than 5 points. To take the average of measurement results, namely it’s the hardness value of the materials