OEM/ODM Supplier Pipe Thickness Gauge - TM510FNplus Coating thickness gauge – TMTeck
OEM/ODM Supplier Pipe Thickness Gauge - TM510FNplus Coating thickness gauge – TMTeck Detail:
● 2 Measuring modes: continuous/single
● 2 Shutdown modes: manual/automatic
●Wide measuring range with 5 probes available (next page)
●Direct testing mode and block statistics mode (APPL/BATCH)
●Can connect with printer to out of statistical values
●Dataview to connect with PC with USB 2.0 port
●500 datas can be stored
Main features
Can use various probe (F400, F1, F1/90 °, F10, N1, N400, etc.) measurement;
Three calibration methods: one point calibration, two point calibration, the basic calibration;
Display resolution: 0.1 um (measuring range of less than 100 um)
1μ m (range greater than 100 u m)
Have five statistics, data storage 500
There are two working methods: direct ways and means of group
There are two measurements: continuous measurement and a single measurement
There are two shutdown: manual and automatic shutdown shutdown
Can be set Bound: The gauge of the measured value can be automatic alarm and a number of measurements available on the histogram value analysis;
Deleted features: the gross error and error settings can be deleted;
Printing: Print Measurement measurement, statistics, gauges, histogram
A music tone in the operation carried out at any time tips
A power supply under-voltage direct function
An error function
And printers, computer communications (communications software operating environment for the Window operating system) connectivity.
Technical Specifications：
<td ” width=”284″>Measuring range <td ” width=”284″>0-1250µ with standard probe F1.N1 (10.000mm max)<td ” width=”284″>Probes available <td ” width=”284″>5 probes available for F (ferrous: on steel/iron) and N (non-ferrous metals)<td ” width=”284″>Tolerance <td ” width=”284″>F1:±(1µ+3%H) N1.±(1.5µ+3% H)H: actual thickness tested<td ” width=”284″>Resolution <td ” width=”284″>Alphanumeric with 4 large digits<td ” width=”284″>Operation language <td ” width=”284″>English<td ” width=”284″>Standards <td ” width=”284″>DIN, ISO, ASTM,BS<td ” width=”284″>Min. measuring area <td ” width=”284″>F1:(standard probe)<td ” width=”284″>Min. curvature radius <td ” width=”284″>convex:3mm, concave:50mm<td ” width=”284″>Min. substratethickness <td ” width=”284″>type F: 0.5mm, type N: 50mm<td ” width=”284″>Calibration <td ” width=”284″>Zero and foil calibration<td ” width=”284″>Statistics <td ” width=”284″>Number of measurements, mean, standard deviation,maximum and minimum of 3000readings<td ” width=”284″>Data memory <td ” width=”284″>500 measuring data<td ” width=”284″>Limits <td ” width=”284″>Adjustable with acoustic alarm<td ” width=”284″>Interface <td ” width=”284″>USB 2.0<td ” width=”284″>Operating temperature <td ” width=”284″>0-40℃<td ” width=”284″>power supply <td ” width=”284″>AA size 1.5V<td ” width=”284″>Dimensions <td ” width=”284″>125*67*31mm (main unit)<td ” width=”284″>Weight <td ” width=”284″>345.g
Standard Delivery
| · Main unit | 1 |
| · Probe F1 or N1 | 1 |
| · Calibration foils | 5 |
| · Instruction manual | 1 |
| · Cetificate | 1 |
| · Warranty card | 1 |
| · Carrying case | 1 |
| Communication cable | 1 |
| PC software Dataview | 1 |
Optional accessories
●5 probes for different applications
●Calibration foils in various thickness
Type F probe:
<td ” width=”47″>F5<td ” width=”122″> <td ” width=”47″>1.5<td ” width=”47″>
F7
F7
F40
<td ” width=”47″>
0.5
0.5
2
| Probe |
F400 |
F1 |
F1/90° |
F10 |
|||
| Measuring Principle | Magnetic method | ||||||
| Measuring range(mm) |
0～400um |
0～1250 um |
0～10000 |
||||
| Min resolution(mm) |
0.1 |
0.1 |
10 |
||||
| Tolerance | One-point calibration (mm) |
±(2%H+0.7) |
±(2%H+1) |
±(2%H+10) |
|||
| Two-point calibration (mm) | ±(1%H+0.7) |
±((1%H+1) |
±(1%H+10) |
||||
| Minimum radius of curvature (convex) (mm) |
1 |
1.5 |
flat |
10 |
|||
| Minimum measuring area(mm) |
F3 |
||||||
| Minimum thickness of base material(mm) |
0.2 |
||||||
Type N probe
| Probe | N400 |
N1 |
CN02 |
|
| Measuring Principle |
Eddy current method |
|||
| Measuring range (mm) |
0～400 |
0～1250 |
10～200 |
|
| Min resolution(mm) |
0.1 |
0.1 |
1 |
|
| Tolerance | One-point calibration (mm) |
±(2%H+0.7) |
±(2%H+1.5) |
±(2%H+1) |
| Two-point calibration (mm) | ±(1%H+0.7) | ±（1%H+1.5） |
——– |
|
| Minimum radius of curvature (convex) (mm) |
1.5 |
3 |
flat |
|
| Minimum measuring area(mm) |
F4 |
F5 |
F7 |
|
| Minimum thickness of base material(mm) |
0.3 |
0.3 |
0 |
|
Product detail pictures:
Related Product Guide:
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of OEM/ODM Supplier Pipe Thickness Gauge - TM510FNplus Coating thickness gauge – TMTeck , The product will supply to all over the world, such as: Netherlands, Jordan, Burundi, All the imported machines effectively control and guarantee the machining precision for the items. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality items and have the ability to develop new merchandise to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.
By Myra from Tunisia - 2018.09.16 11:31
The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
By Charlotte from Sao Paulo - 2018.09.23 17:37
Products categories
-
PriceList for Magnetic Particle Test Block - D...
-
Low price for Smith Hammer Test - TMH-1000 Tes...
-
China wholesale Ultrasonic Probe - Mini Angle ...
-
2021 Good Quality Portable Conductivity Meter -...
-
Low price for Abrasive Metallographic Cutting M...
-
Chinese wholesale Ultrasonic Speed Transducer -...