OEM/ODM Factory Car Paint Thickness Gauge - Cross Hatch Cutter – TMTeck

Specifications
TMTeck design cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching.This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate.
The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy.
Main Technical Parameters:
1.Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade.
2.Multi-cutting blades spacing:1mm/2mm/3mm
3.The number of square:25squares/100squares
Main technical parameters:

<td ” width=”115″>Working blade <td ” width=”144″>Width of blade end <td ” width=”96″>Hardness <td ” width=”228″>Coat thickness<td ” width=”115″>1mm  6 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard <td ” width=”228″>0-60μm<td ” width=”115″>1mm  11 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard <td ” width=”228″>0-60μm       (0-50μm ASTM)<td ” width=”115″>2mm  6 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard & Soft <td ” width=”228″>61-120μm    (50-125μm ASTM)<td ” width=”115″>2mm 11 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard & Soft <td ” width=”228″>61-120μm     (50-125μm ASTM)<td ” width=”115″>3mm  6 tooth <td ” width=”144″>0.03mm, 0.06mm <td ” width=”96″>Hard & Soft <td ” width=”228″>121-250μm

Standard Package:
Cross Hatch Cutter:1pcs
Magnifier: 1pcs
Brush:1 pcs
Gummed tape(3M):1pcs