Good quality Wet Thickness Gauge - Ultrasonic thickness gauge A&B Scan for testing rubber thickness TM281 DL – TMTeck

Short Description:

Product Detail

Product Tags

Feedback (2)

Our organization sticks to your principle of "Quality may be the life of your organization, and reputation will be the soul of it" for Shore D Durometer Hardness Tester, Standard Ut Calibration Blocks, Digital Welding Gauge, We attend seriously to produce and behave with integrity, and by the favor of customers at home and abroad in the xxx industry.

Good quality Wet Thickness Gauge - Ultrasonic thickness gauge A&B Scan for testing rubber thickness TM281 DL – TMTeck Detail:

TM281 Series Color Screen with A/B-Scan Ultrasonic Thickness Gauge Professional in Solving Various Difficult Thickness Measurement

Features:
2.4” color OLED, 320 X 240 pixels, contrast 10,000:1

Live Color A-Scan

Users could directly see the color waveform of the ultrasonic sound (or A-scan) on the screen, which is quite important for the occasions that we need to check the correctness of the testing results. Many cases will cause wrong testing results or even noreadings. We could find the causes easily through the A-scan. Adjust the three parameters of GAIN, BLACKING, GATE, and then we will get the right readings.

Live Color B-Scan

TM281 series thickness gauge has time base B-scan function. Move the probe along the workpiece surface, then the cross -sectional profile of the workpiece display, use for observe the underside contour of the workpiece.It could be automatically capture a minimum value of the B-scan image, and indicate the position of the minimum by a red triangle. You can see any point thickness value of the B-scan image by moving the pointer.

Through Coating Function
No longer need to waste time to remove the coating
Now TM281D and TM281DL also have this widely acclaimed function. It’s realized by measuring the two continuous bottom surface of the substrate. This mode also has more advantages:
1.Exempt Zero Calibration
2.High Stability, the measuring value is not influenced by the probe pressure, the coupling layer thickness and the surface dust of the workpiece.
3.Zero Drift

More Practical Function
Difference/Reduction Rate: Difference mode displays the difference between the actual value and the normal value. Reduction rate calculates and shows the percentage of the thickness reduction when the material becomes thin. Typical application is to measure the metal material which is due to bending and becomes thin.
Max./Min. Capture: On this mode, the current thickness, minimum thickness and the maximum thickness will be shown on the screen at the same time.
Alarm Mode: Dynamic change the color of thickness readings when alarming.
Update Rate: Selectable 4Hz, 8hz and 16Hz. 4Hz for ordinary application, when you need a quick scan, such as high temperature measurement, you can choose higher update frequency.
Multi- Languages Available: Chinese, English, Japanese, French, German.

Standard TC510 Probe
The probe is the heart of the instrument,TMTeck has the world’s leading probe production technology. TC510 probe uses the high performance piezoelectric ceramic chip, with integrated metal die-casting shell, practical design of probe and cable separated, regardless of costs to create high quality .

The Difference Between TM281 Series Ultrasonic Thickness Gauge

	TM281	TM281D	TM281DL
Color Display	√	√	√
Live A-Scan	√	√	√
Time-based B-Scan	√	√	√
Control of Gain and Gate	√	√	√
Blanking	√	√	√
Thru-paint&coatings	×	√	√
Data Logger	×	×	√
DataView Software	×	×	√

Specifications of TM281DL Ultrasonic Thickness Gauge

Display Type	2.4” color OLED, 320×240 pixels, contrast 10,000:1
Operating Principle	Pulse echo with dual elemet transducers
Measuring Range	0.50mm to 508mm(0.02” to 20.00”), depending on material, probe and surface condition
Measuring Resolution	Selectable 0.01mm, 0.1mm(selectable 0.001”, 0.01”)
Units	Inch or Millimeter
Rectify Mode	RF+, RF-, HALF+, HALF-, FULL
Display Mode	Normal, Minimum/Maximum capture, DIFF/RR%, A-Scan, B-Scan
V-Path Correction	Automatic
Update Rate	Selectable 4Hz, 8Hz, 16Hz
Material Velocity Range	500 to 9999m/s(0.0197 to 0.3939 in/μs)
Languages	English, French, German, Japanese,Chinese
Alarm Settings	Minimum and Maximum alarms. Range of 0.25mm to 508mm (0.010” to 20.00”). Dynamic waveform color change on alarm
Power Requirements	2 AA size batteries
Operating Time	Approximately 40 hours
Instrument Shut-off	Selectable ALWAYS ON or AUTO OFF after 5, 10, 20 minutes of inactivity
Operating Temperature	-10℃ to +50℃(+10°F to +12°F )
Size	156mm × 75mm × 38mm (H × W × D)
Weight	270g including batteries

Standard Delivery

Name	Quantity
Main body	1
Probe	1
Battery	1
Couplant	1
Carrying Case	1
Operating Manual	1
USB Cable	1
Software	1

TM281 Probe/Transducer Specifications
PIC	Model	Type	Frequency	Contact Diameter	Measurement Range	Temperature Range
	PT-08	TM280 Standard	5MHz	11mm	0.8 to 100.0mm	-10 to 70℃
	TC510	TM280D/DL Standard	5MHz	13.5mm	1.2 to 200.0mm	-10 to 70℃
	TC550	Small tube	5MHz	5mm	0.8-60 mm	-10 to 70℃
	ZT-12-2	Cast iron	2MHz	17mm	4.0 to 508mm	-10 to 70℃
	PT-06	Small tube	7.5MHz	8mm	0.8 to 30mm	-10 to 70℃
	PT-04	Fingertip	10MHz	6mm	0.7 to 12mm	-10 to 70℃
	GT-12-2	High- Temperature	5MHz	15mm	4 to 80mm	-20 to 300℃

Product detail pictures:

Related Product Guide:

To be able to give you benefit and enlarge our business, we also have inspectors in QC Team and assure you our greatest service and products for Good quality Wet Thickness Gauge - Ultrasonic thickness gauge A&B Scan for testing rubber thickness TM281 DL – TMTeck , The product will supply to all over the world, such as: Sri Lanka, Somalia, Egypt, So far our products have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have 13years professional sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to offer our customers with high quality products and excellent service.

Digital Coating Thickness Gauge