Factory Free sample Metallographic Sample Cutter - Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100 – TMTeck
Factory Free sample Metallographic Sample Cutter - Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100 – TMTeck Detail:
Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100
Model TMSQ-60 Metallographic Specimen Cutting Machine can be used to cut the general metallographic or petrographic specimen materials. To enable the machine to cut the best specimen in a safe state, this kind of machine is equipped with fully enclosed structure and fast clamping mechanism, and there is also a cooling tank for coolant recycling, in order to clear up the heat produced during cutting and avoid the metallographic or petrographic structure deforming of specimen because of heating influence. This machine features easy operation and reliable safety. It is the best instrument for specimen preparing and cutting.
Technical specifications:
1. Max. cutting section: Φ60mm
2. Rotate Speed: 2800rpm
3. Abrasive wheel: 250×2×32mm
4. Electric motor: 2.2KW 380V, 50Hz
5. Dimensions : 730×700×540mm
Model SQ-80 Metallographic Specimen Cutting Machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or petrographic structure. The equipped cooling system can clear up the heat produced during cutting so that it will avoid the metallographic or petrographic structure deforming of specimen because of heating influence. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
Technical specifications:
1. Power: Three-phase four-wire (380V 50Hz)
2. Rotate Speed: 2800rpm
3. Abrasive wheel: 250×1.2×32mm
4. Max. cutting diameter: 80mm
5. Electric motor: Y2-100l-2 3.0KW
Model SQ-100 Metallographic Specimen Cutting Machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or petrographic structure. The equipped cooling system can clear up the heat produced during cutting so that it will avoid the metallographic or petrographic structure deforming of specimen because of heating influence. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
Technical specifications:
1. Power: Three-phase four-wire (380V 50Hz)
2. Rotate Speed: 2800rpm
3. Abrasive wheel: 250×1.2×32mm
4. Max. cutting diameter: 100mm
5. Electric motor: Y2-100l-2 3.0KW
Product detail pictures:
Related Product Guide:
Well-run equipment, professional sales team, and better after-sales services; We are also a unified big family, everyone stick to the company value "unification, dedication, tolerance" for Factory Free sample Metallographic Sample Cutter - Metallographic Specimen Cutting Machine Model SQ 60 SQ80 SQ100 – TMTeck , The product will supply to all over the world, such as: Peru, Curacao, Lebanon, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Dana from Amsterdam - 2017.12.09 14:01
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Caroline from Estonia - 2017.11.01 17:04
