Factory Free sample Metallographic Sample Cutter - Metallographic Mounting Press XQ-2B – TMTeck

Model XQ-2B Metallographic Sample Mounting Presses are suitable for the thermos-hardening plastic pressing of the small metallographic specimen which is not idiomorphic or hard to take. After forming, it will be very easy for the grinding, polishing of the specimen and it is also convenient for people to measure the metallographic structure under metallographic microscope.

The machine may work stably under the following working conditions:

The height is no more than 1000m;

The temperature of surrounding medium can not be lower than -10 °C or over 40 °C;

The relative humidity of air should be no more than 85% (20 °C).

The voltage fluctuation should be no more than 15% and there should be no obvious vibration source around.

There should be no current conducting dust, explosive and corrosive air.