China wholesale Step Wedge - ASME Non-piping calibration block ASME Sec V T-434.2.1 – TMTeck
China wholesale Step Wedge - ASME Non-piping calibration block ASME Sec V T-434.2.1 – TMTeck Detail:
ASME Basic Calibration Block is used for establishment of primary reference responses for UT examination of welds. ASME Basic Calibration Block 1 contains three side-drilled holes at 38mm deep minimum at 2.5mm diameter. the hole locations through the thickness are 1/4, 1/2 and 3/4 T. it also contains 2 EDM notches measuring 2% T deep * 6.4mm max wide * 25 long min. In accordance with ASME Sec V T-434.2.1
| Weld Thickness(mm) | Block Dimension(mm) Thick*Wide*Long |
NetWeight | GrossWeight | Packing |
| Up to 25 | 19*150*150 | 3.5 | 4.5 |  |
| Over 25 through 50 | 38*150*200 | 9 | 10 | |
| Over 50 through 100 | 75*150*250 | 23 | 24 | |
| Over 100 | 125*150*381 | 58 | 62 |
All standard blocks can be customized per request!
Product detail pictures:
Related Product Guide:
Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for China wholesale Step Wedge - ASME Non-piping calibration block ASME Sec V T-434.2.1 – TMTeck , The product will supply to all over the world, such as: Cyprus, Iceland, Slovenia, we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
By Chris from Paraguay - 2018.05.13 17:00
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Lilith from Peru - 2018.09.21 11:44
Write your message here and send it to us
