2021 Good Quality Durometer Test Block - Navships Test Block – TMTeck

Short Description:

Product Detail

Product Tags

Feedback (2)

Our progress depends around the innovative machines, great talents and consistently strengthened technology forces for Factors Affecting Rebound Hammer Test, Gloss Meter 60 Degree, Hardness Test Blocks, If you are fascinated in any of our products, you should come to feel no cost to call us for more aspects. We hope to cooperate with a lot more close friends from all over the world.

2021 Good Quality Durometer Test Block - Navships Test Block – TMTeck Detail:

Description
Used for distance amplitude correction, sensitivity levels and flaw depth information.

Inch
Contains six 3/64″ diameter side-drilled through-holes at distances of 0.25″ to 2.75″ in 0.25″ increments. MTDs are engraved near both scan edges on one face. In accordance with MIL-STD-271G Figure 9, and NAVSHIPS Specification 0900-006-3010/Section 6. Also known as a “Mare Island block.” This block is surface ground to a 32 Ra finish on all surfaces, and the steel version is nickel-plated.

•Dimensions: 12.000″ x 3.000″ x 1.250″
•material: 1018 Steel, stainless steel , aluminum
•plastic carrying case
• We also manufacture a Navy version (3020 block) with rougher scanning surfaces (125 to 250 Ra max), and an extra hole at 0.125″ MTD.

Metric
Contains six 1.2mm diameter side-drilled through-holes at distances of 6.25mm to 68.75mm in 6.25mm increments. MTDs are engraved near both scan edges on one face. Metric equivalent of U.S. customary block, based on MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6. This block is surface ground to a 32 Ra finish on all surfaces.

•Dimensions: 30mm x 75mm x 300mm
•Metric version.
•material: 1018 Steel, stainless steel , aluminum
•plastic carrying case
Package including
1 calibration block
1 certificate
1 block case

Product detail pictures:

Related Product Guide:

The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for 2021 Good Quality Durometer Test Block - Navships Test Block – TMTeck , The product will supply to all over the world, such as: Sao Paulo, Algeria, Uruguay, In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.

Aluminum Step Wedge

Calibration Blocks

Calibration Step Wedge

Hardness Test Blocks

Rockwell Standard Calibration Block

Wilson Hardness Test Blocks

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.

By Jodie from Zurich - 2017.08.21 14:13

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.

By Victor Yanushkevich from Lyon - 2018.02.12 14:52

Write your message here and send it to us