2021 China New Design Ut Thickness Gauge Prices - TM510FNplus Coating thickness gauge – TMTeck
2021 China New Design Ut Thickness Gauge Prices - TM510FNplus Coating thickness gauge – TMTeck Detail:
● 2 Measuring modes: continuous/single
● 2 Shutdown modes: manual/automatic
●Wide measuring range with 5 probes available (next page)
●Direct testing mode and block statistics mode (APPL/BATCH)
●Can connect with printer to out of statistical values
●Dataview to connect with PC with USB 2.0 port
●500 datas can be stored
Main features
Can use various probe (F400, F1, F1/90 °, F10, N1, N400, etc.) measurement;
Three calibration methods: one point calibration, two point calibration, the basic calibration;
Display resolution: 0.1 um (measuring range of less than 100 um)
1μ m (range greater than 100 u m)
Have five statistics, data storage 500
There are two working methods: direct ways and means of group
There are two measurements: continuous measurement and a single measurement
There are two shutdown: manual and automatic shutdown shutdown
Can be set Bound: The gauge of the measured value can be automatic alarm and a number of measurements available on the histogram value analysis;
Deleted features: the gross error and error settings can be deleted;
Printing: Print Measurement measurement, statistics, gauges, histogram
A music tone in the operation carried out at any time tips
A power supply under-voltage direct function
An error function
And printers, computer communications (communications software operating environment for the Window operating system) connectivity.
Technical Specifications：
<td ” width=”284″>Measuring range <td ” width=”284″>0-1250µ with standard probe F1.N1 (10.000mm max)<td ” width=”284″>Probes available <td ” width=”284″>5 probes available for F (ferrous: on steel/iron) and N (non-ferrous metals)<td ” width=”284″>Tolerance <td ” width=”284″>F1:±(1µ+3%H) N1.±(1.5µ+3% H)H: actual thickness tested<td ” width=”284″>Resolution <td ” width=”284″>Alphanumeric with 4 large digits<td ” width=”284″>Operation language <td ” width=”284″>English<td ” width=”284″>Standards <td ” width=”284″>DIN, ISO, ASTM,BS<td ” width=”284″>Min. measuring area <td ” width=”284″>F1:(standard probe)<td ” width=”284″>Min. curvature radius <td ” width=”284″>convex:3mm, concave:50mm<td ” width=”284″>Min. substratethickness <td ” width=”284″>type F: 0.5mm, type N: 50mm<td ” width=”284″>Calibration <td ” width=”284″>Zero and foil calibration<td ” width=”284″>Statistics <td ” width=”284″>Number of measurements, mean, standard deviation,maximum and minimum of 3000readings<td ” width=”284″>Data memory <td ” width=”284″>500 measuring data<td ” width=”284″>Limits <td ” width=”284″>Adjustable with acoustic alarm<td ” width=”284″>Interface <td ” width=”284″>USB 2.0<td ” width=”284″>Operating temperature <td ” width=”284″>0-40℃<td ” width=”284″>power supply <td ” width=”284″>AA size 1.5V<td ” width=”284″>Dimensions <td ” width=”284″>125*67*31mm (main unit)<td ” width=”284″>Weight <td ” width=”284″>345.g
Standard Delivery
| · Main unit | 1 |
| · Probe F1 or N1 | 1 |
| · Calibration foils | 5 |
| · Instruction manual | 1 |
| · Cetificate | 1 |
| · Warranty card | 1 |
| · Carrying case | 1 |
| Communication cable | 1 |
| PC software Dataview | 1 |
Optional accessories
●5 probes for different applications
●Calibration foils in various thickness
Type F probe:
<td ” width=”47″>F5<td ” width=”122″> <td ” width=”47″>1.5<td ” width=”47″>
F7
F7
F40
<td ” width=”47″>
0.5
0.5
2
| Probe |
F400 |
F1 |
F1/90° |
F10 |
|||
| Measuring Principle | Magnetic method | ||||||
| Measuring range(mm) |
0～400um |
0～1250 um |
0～10000 |
||||
| Min resolution(mm) |
0.1 |
0.1 |
10 |
||||
| Tolerance | One-point calibration (mm) |
±(2%H+0.7) |
±(2%H+1) |
±(2%H+10) |
|||
| Two-point calibration (mm) | ±(1%H+0.7) |
±((1%H+1) |
±(1%H+10) |
||||
| Minimum radius of curvature (convex) (mm) |
1 |
1.5 |
flat |
10 |
|||
| Minimum measuring area(mm) |
F3 |
||||||
| Minimum thickness of base material(mm) |
0.2 |
||||||
Type N probe
| Probe | N400 |
N1 |
CN02 |
|
| Measuring Principle |
Eddy current method |
|||
| Measuring range (mm) |
0～400 |
0～1250 |
10～200 |
|
| Min resolution(mm) |
0.1 |
0.1 |
1 |
|
| Tolerance | One-point calibration (mm) |
±(2%H+0.7) |
±(2%H+1.5) |
±(2%H+1) |
| Two-point calibration (mm) | ±(1%H+0.7) | ±（1%H+1.5） |
——– |
|
| Minimum radius of curvature (convex) (mm) |
1.5 |
3 |
flat |
|
| Minimum measuring area(mm) |
F4 |
F5 |
F7 |
|
| Minimum thickness of base material(mm) |
0.3 |
0.3 |
0 |
|
Product detail pictures:
Related Product Guide:
With this motto in mind, we have turn out to be amongst probably the most technologically innovative, cost-efficient, and price-competitive manufacturers for 2021 China New Design Ut Thickness Gauge Prices - TM510FNplus Coating thickness gauge – TMTeck , The product will supply to all over the world, such as: Riyadh, Luxemburg, Saudi Arabia, By integrating manufacturing with foreign trade sectors, we can present total customer solutions by guaranteeing the delivery of right merchandise to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified products and the control of the industry trend as well as our maturity before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
By Geraldine from Ottawa - 2017.02.18 15:54
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Marina from Dominica - 2017.10.27 12:12
Products categories
-
OEM/ODM China Non-Destructive Testing Uv Light ...
-
OEM Supply Shore D Durometer Hardness Tester -...
-
Wholesale Price Dac Test Block - Carrying case...
-
Factory Cheap Hot Tr100 Surface Roughness Teste...
-
China wholesale Uv Lamp - Portable UV LED lamp...
-
China wholesale Metallographic Cutting Machine ...